-
Details
REFURBISHED BRUKER BIOTYPER MICROFLEX LT/SH MALDI-MS SYSTEM
This Refurbished Bruker Biotyper Microflex LT/SH Maldi-MS System is in excellent working condition. In 2021 has been software updated with all the latest software libraries, and laser was replaced with new. If you are familiar with Bruker software prices all these libraries / software packages cost more than the instrument itself. Benefit from this offer and take the instrument with a fraction of the original price. We have the ability to install the instrument and train your personel/users at additional cost. We also offer service contracts.
System includes :
- 1838206 Microflex/ Biotyper MALDI
- 1836422 MBT Compass
- 1843241 MBT Compass
- 1836417 MBT Explorer
- 829014 MBT Filamentous Fungi Library
- 1850731 MBT Mycobacteria IVD Suite.
- 1828479 MSP Septsityper Module
- 1842250 MBT Subtyping Module
-
Details
This is a fully refurbished GC MS MS system that includes the following:
Varian GC CP-3800
Varian Autosampler CP-8400
Varian MS-320 MS system Triple Quadropole
Computer+Screen 22″+Keyboard+mouse+Cards
Software Star MS preinstalled
This system has been tested from our Test Lab technical team.
-
Details
Edwards E2M28 Vacuum Pump
- This Pump has very low working hours.
- Fully refurbished and serviced in like new condition.
- Fully tested with vacuum gauce tester to meet the manufacturer standards.
- Very quiet operations.
There are available two Edwards E2M28 Vacuum Pump in similar condition, the price will be 1500.00€ for each.
Please contact us for more information. Should you have any question please do not hesitate to contact us.
-
Details
Sanyo Incubator MCO-18AIC
*Only Temperature*
Manual: Sanyo incubator Instruction
SPECIFICATIONS
Model: MCO-18AC External dimensions: W620 x D710 x H900 (mm)
Internal dimensions: W490 x D523x H665 (mm)
Interior volume: 170 L
Exterior: Painted steel
Interior: Stainless steel containing copper
Outer door: Painted steel
Inner door: Tempered glass
Tray: 3 trays made of stainless steel containing copper
W450 x D450 x H12 (mm), Maximum load; 7 kg/tray
Access port: Inner diameter; 30 mm, On the back side
Insulation: Rigid polyurethane foamed-in place
Heating system: DHA system (heater jacket + air jacket system)
Heater: 282 W
Humidifying system: Natural evaporation with humidifying pan
Temperature controller :PID control system
Temperature display: Digital display CO2: NO – Only Temperature -
Details
The Genius ABN2ZA is a three gas output system providing nitrogen and dry air to supply curtain, source, and exhaust gas. This generator is compatible with a
wide range of SCIEX LCMS instruments up to and including the 4600
Triple TOF. The ABN2ZA is built around the trusted and proven
technology of Peak Scientific’s Genius Series of generators.
Designed mainly for LCMS applications, these are selfcontained
systems featuring integrated compressors, delivering laboratorygrade
nitrogen at various pressures and flow rates required by numerous instruments.- Gas types Nitrogen, Air
- Integrated compressor: Yes
- Application Types: Suitable for selected SCIEX LCMS instruments
-
Details
Features & Benefits
-anti-suckback valve and vent device
-forced oil circulation / air ventilation
-universal voltage and frequency
-large pumping capacity
-green technology
-built-in oil shield
-low power requirementsApplications
• analytical instruments • mass spectrometry • electron microscopes
• leak detection • industrial vacuum processes • high energy physics
• research laboratories -
Details
Nikon Optiphot Binocular Microscope with 2 Objectives (x10, x40) and x15 eyepieces.
Please see below the manual
-
Details
The Leica ATC2000 microscope features a binocular head with 10x eyepieces. It comes with 4x, 10x, 40x, and 100x oil objectives. This used microscope has been professionally serviced by our technicians.
-
Details
Heraeus BK 6160 Kelvitron® KP testing chamber is ideal for packaging and
shelf-life testing. Its unique heating and cooling system includes a
thermal jacket to ensure uniform temperature within the interior
chamber. Heating and cooling systems are located outside and below
the chamber, where air is mixed and transported to the thermal jacket.
Unlike conventional incubators, the BK 6160 testing chamber is designed
to prevent de-humidification, achieving up to 90% relative humidity with
the addition of an internal water pan.
Our programmable temperature controllers allow exact temperature
settings and timing of temperature cycles, even light cycles to simulate
day and night.The BK 6160 offers:
• Large 166 L capacity provides high testing efficiency
• Temperature range of 0° to 50°C for a wide range of
testing chamber trials
• Programmable temperature controllers allow many
environmental simulations
• Seamless steel interiors with rounded corners for
easy cleaning
• De-humidification prevention avoids sample searing -
Details
General Protocol ovens are perfect for routine daily work, providing the ideal heating and drying solution for your applications. Mechanical Convection allows for fast sample drying and heating, superior temperature uniformity, and fast temperature recovery after door openings.
Inner chamber is made from stainless steel AISI 430 with rounded corners for easy cleaning
Door can be opened 180° to allow convenient access to the interior for hassle free cleaning and easy loading of probes
Simple, microprocessor-based touch button controls
Built in timer can be set to ON or OFF
RS232 data interface included
Fresh Air damper provides control over air exchanges and is manually controlled
The exhaust vent can be used as an access port for an external temperature sensor
Stackable with an optional stacking kit
Heratherm ovens feature an environmentally friendly design with cost savings in mind, reducing energy consumption by as much as 20% compared to previous (Lindberg Blue M and Precision) models.
Surpassing energy efficiency, increasing cost effectiveness, reducing environmental impact
Unique door design reduces heat emission significantly
Timer for effective usage and additional energy savings
Designed with a very small footprint ratio compared to the interior volume
Flexible shelving system allows for optimal space utilization
Routine check upon startup for optimum performance levels
Automatic audible and visual overtemperature alarm system to protect samples
Access port for data logging with independent sensors
Low surface temperatures
Large, easy to view vacuum fluorescent display
Easy setting with intuitive interface
Easy cleaning with rounded corners
-
Details
Cooled incubator LMS 300NP, Door LMS double glazed
Specifications
Model: 300NPDG
Capacity: 290l
Temperature Stability: ±0.1°C
Int. Width (Metric): 550mm
Int. Height (Metric): 1170mm
Int. Depth (Metric): 450mm
Ext. Width (Metric): 680 mm
Ext. Height (Metric): 1810mm
Weight (Metric): 130 kg
Please find attached the LMS001_EN INSTRUCTION MANUAL
-
Details
Heraeus Labofuge 400 benchtop centrifuge is ideal for average-sized samples in routine lab applications for research, biology and medicine. It comprises state-of-the-art technology, providing clear advantages for routine operations and everyday use in the laboratory.
The versatile swinging bucket rotor can accommodate round buckets and a full range of adapters to accommodate the most common tubes.Features:
– User-friendly Megacontrol II microprocessor-controller
– LED indicators for temperature, speed, RCF settings and runtime (1?99 min, continuous operation)
– Quick-run function for short spins
– Soft-start/soft-brake function for gentle centrifugation and tapered braking for sensitive samples
– Effective safety concept (complies with IEC 1010)
– Automatic imbalance cut-out
– Steel jacket system
– Rotor overspeed protection
– Accessories for aerosol-tight centrifugation
– Maintenance-free induction drivePlease find attached the User Manual Heraeus Labofuge 400 – User manual (en,de)
-
Details
The Sanyo MDF-U730M is a manual defrost freezer designed for biomedical use and ideally suited for biomedical storage including the long-term preservation and storage of specimens and components, biologics, reagents, enzymes, and vaccines, among other materials. The Sanyo MDF-U730M offers precise and uniform storage temperatures with a specially designed rotary compressor that significantly reduces energy consumption while also providing quiet operation.
-
Details
Key Features- Precision Zero Air 15l
Integrates seamlessly with other Precision units
Hydrocarbon content <0.05ppm for market-leading
purity
Minimum lifetime maintenance requirements, no
expensive catalyst chamber replacements
Avoid risk of contaminants entering the system (when
switching out empty cylinders)
No risk of running out of gas in middle of analysisKey Features- Precision Air Compressor
Compressed air supply for Precision Nitrogen and Zero Air
generators
Single unit can supply both the Precision Nitrogen and Zero
Air generators in a stack
Duplex compressorA.Precision Zero Air Datasheet
-
Details
Peak Scientific Instruments Nitrogen Generator NG600A
Technical Specification
Environment
Minimum Operating Ambient Temperature 5°C / 41°F
Maximum Operating Ambient Temperature 35°C / 95°F
Maximum Altitude 2000 meters
Maximum Relative Humidity 70%
Minimum Storage Temperature 10°C / 50°F
Maximum Storage Temperature 25°C / 75°FGenerator Outlets
Max Flow Rate (cc/min @ 80 psi (5.5 Bar)): 600
Particles: <0.01μm
Phthalates: None
Suspended Liquids:None
Gas Outlets: 1
Start-Up Time For Purity: 8 hoursElectrical Requirements
Voltage: 110/230v
Frequency: 50/60 Hz
Current 230v (110v): 2.2 (5.2) A
Pollution Degree: 2
Installation Category: IIGeneral
Generator Dimensions cm (“): 43 (16.9) x 41 (16.1) x 62 (24.4)
Generator Weight kg (lbs): 33 (73) -
Details
Peak Scientific NG10LA Nitrogen Generator with Compressor
The offered instrument is fully functional tested and ready to use.
Copyright Scientific-Instruments 2012
Powered by Sylviecom