-
Details
iScope – A masterpiece in microscopy
The iScope is available in various configurations suitable for Life and Biomedical Sciences, high schools, universities but also for routine medical applications
Besides the brightfield contrast method, configurations for phase contrast, cardioid mirror darkfield, basic polarization and several epi- illumination sources for fluorescence applications can be used. iScope models with multi-heads are also available for teaching purposes
EYEPIECES
• Extended Wide Field EWF plan 10x eyepieces with 20 mm field of view and adjustable diopter on the left eyepiece for finity corrected systems (Ø 23.2 mm tube)• Extended Wide Field HWF plan 10x eyepieces with 22 mm field of view and adjustable diopter on both eyepieces for infinity corrected IOS plan and plan phase systems and adjustable diopter on the left tube for EPLi systems (Ø 30 mm tube)
HEAD
• Binocular and trinocular Siedentopf type heads with 30° inclined tubes. Interpupillary distance from 48 to 76 mm.
• The trinocular head of the Plan infinity corrected models (IS.1153-PLi) has an optical path selector (100:0 / 50:50) and ± 5 diopter adjustments on both Ø 30 mm tubes
• The trinocular head of the E-Plan infinity corrected models (IS.1153-EPLi) has a fixed built-in beamsplitter (50:50) and ± 5 diopter adjustment on the Ø 30 mm left tube
• The trinocular head of the E-plan finite models (IS.1153-EPL) has a fixed built-in 50:50 beamsplitter and one ± 5 diopter adjustment on the
Ø 23.2 mm left tube
• A unique rotating system allows the ergonomic positioning of both tubes in a high (431 mm) and in a low position (397 mm)
• The trinocular head comes with a Ø 23.2 mm photo portERGONOMICAL TILTING HEAD
Optional ergonomic 5 to 35° tilting head, interpupillary distance 48-75 mm and optional photo attachment with standard Ø 23.2 mm tube (only infinity corrected models and not suitable for multi head systems)MULTIHEAD SYSTEM
The iScope® can be extended with a unique multihead system for in total two, three or five heads, allowing simultaneous observation of specimens. The central attachment is equipped with a joystick to move a green and red laser pointer across the entire field of view of all heads. Configurations with one, two or four additional viewing binocular heads, 30° inclined tubes and plan 4x, 10x, S40x, S100x oil immersion infinity corrected IOS objectives. All heads are equipped with extended wide field plan EWF 10x/22 mm eyepieces
(references: IS.1156-PLi-x, x = total number of heads) -
DetailsA03Product codeA03ManufacturerCity Technology
Electrochemical cell for oxygen, range 0-100%, indicated for gas analyzer for automotive.
-
Details
Available for sale is:
Memmert 28Lt Oven
In good working condition tested from our service team.
d
-
Details
REFURBISHED BRUKER BIOTYPER MICROFLEX LT/SH MALDI-MS SYSTEM
This Refurbished Bruker Biotyper Microflex LT/SH Maldi-MS System is in excellent working condition. In 2017 has been software updated with all the latest software libraries, and laser was replaced with new. If you are familiar with Bruker software prices all these libraries / software packages cost more than the instrument itself. Benefit from this offer and take the instrument with a fraction of the original price. We have the ability to install the instrument and train your personel/users at additional cost. We also offer service contracts.
THE FOLLOWING SOFTWARE and LIBRARIES ARE AVAILABLE KINDLY LET US KNOW WHAT WOULD YOU LIKE TO INCLUDE AND WE WILL SENT AN OFFER:
1838206 SW-PACKAGE MALDI BIOTYPER 4.0 SR1
1843241 MBT Compass
1829014 MBT FILAMENTOUS FUNGI LIBRARY
8703816 SW-License MALDI Biotyper SecurityPack
1828479 MSP Septsityper Module
1842250 MBT Subtyping Module
Computer with pre-installed all the above software
Mouse, Keyboard and Monitor 22″
Connection Cables, Power cord and manuals
Please contact us for more information. Should you have any question please do not hesitate to contact us.
SHIPPING & HANDLING
We will ship it by freight service.
Comes with original wooden box.
Lead time:15 business days.
International shipping cost will be estimated. Please contact us for the shipping quote.
TERMS AND CONDITIONS
3 months warranty for the system.
-
Details
This is a fully refurbished GC MS MS system that includes the following:
Varian GC CP-3800
Varian Autosampler CP-8400
Varian MS-320 MS system Triple Quadropole
Computer+Screen 22″+Keyboard+mouse+Cards
Software Star MS preinstalled
This system has been tested from our Test Lab technical team.
Buyer is welcome to see and inspect the instrument prior to the purchase.
90 days guanantee.
-
DetailsA02Product codeA02ManufacturerCity Technology
Electrochemical cell for oxygen, range 0-100%, indicated for gas analyzer for automotive.
-
Details
Available for sale is:
Silverson L4R High shear rotor-stator mixer
In good working condition tested from our service team.
It comes with high quality heavy steel base.
Suitable for
•Food•Cosmetic and health care products•Fine chemicals•Rotor-stator devices provide a focused delivery of energy, power, and shear•Micro-mixing•Dissolution•Emulsification and de-agglomeration•Rotor-stator devises used in a batch systemmay provide the flexibility to produce a wide rangeof products in one vessel. -
Details
This refurbished EDWARDS E2M28 PUMP has very low working hours . Fully refurbished and Serviced in like new condition, Fully Tested with our Vacuum Gauce Tester instrument to meet the manufacturers standards. Very Very Quiet Operation.
TWO PUMPS AVAILABLE IN SIMILAR CONDITION, IF BOTH BOUGHT AT THE SAME TIME PRICE WILL BE 1500 EURO EACH
Please contact us for more information. Should you have any question please do not hesitate to contact us.
SHIPPING & HANDLING
We will ship it by freight service.
Lead time:5 business days.
International shipping cost will be estimated. Please contact us for the shipping quote.
TERMS AND CONDITIONS
3 months warranty for the Pump.
-
Details
Ashing furnace LV ../11 is designed especially for ashing processes to 1050 °C in the laboratory. Applications include determining loss on ignition, ashing
food and plastics for subsequent substance analysis. A special fresh-air and exhaust air system ensures that the air is replaced 6 times per minute so that
there is always sufficient oxygen for the ashing process. Incoming air passes the furnace heating and is pre-heated to ensure good temperature uniformity.Standard Equipment
· Tmax 1100 °C
· Heating from two sides
· Ceramic heating plates with integral heating element which is safeguarded, and
easy to replace
· Air exchange of more than 6 times per minute
· Good temperature uniformity due to preheating of incoming air, temperature
uniformity according to DIN 17052-1 to +/− 10 °C in the defined empty work area
(from 550 °C)
· Suitable for many standardized ashing processes according to ISO, ASTM, EN,
and DIN
· Optional flap door (LV) which can be used as work platform or lift door (LVT) with
hot surface facing away from the operator
· Controller B410 (5 programs with each 4 segments), alternative controllersAdditional Equipment
· Over-temperature limiter with adjustable cutout temperature as temperature
limiter to protect the oven and load
· Port for thermocouple in the rear wall or in the furnace door
· Charging rack with closed or perforated trays for loading the furnace in two
levels incl. holder for inserting/removing the trays up to a max. temperature of 800°C and a max. loading weight of 2 kg for the LV(T) 9/11 respectively 3 kg for
the LV(T) 15/11 -
Details
Due to their solid construction and compact stand-alone design, these high-temperature furnaces are perfect for processes in the laboratory where
the highest precision is needed. Oustanding temperature uniformity and practical details set very high quality benchmarks. For configuration for your
processes, these furnaces can be extended with extras from our extensive option list.Standard Equipment
· Tmax 1600 °C, 1750 °C, or 1800 °C
· Recommended working temperature 1750 °C (for models HT ../18), increased
wear and tear must be expected in case of working at higher temperatures
· Dual shell housing with fan cooling for low shell temperatures
· Heating from both sides via molybdenum disilicide heating elements
· High-quality fiber insulation backed by special insulation
· Side insulation constructed with tongue and groove blocks provides for low heat
loss to the outside
· Long-life roof insulation with special suspension
· Chain-guided parallel swivel door for defined opening and closing of the door
· Two-door design (front/back) for high-temperature furnaces from HT 276/..
· Labyrinth sealing ensures the least possible temperature loss in the door area
· Reinforced floor as protection for bottom insulation as standard from models
HT 16/16 upwards (distributed load 5 kg/dm2)
· Vapor vent in the furnace roof with motorized exhaust air flaps, controlled via the
extra function of the controller
· Heating elements switched via thyristorsAdditional Equipment
· Cooling system to cool the furnace with a defined temperature gradient or with
a preset fresh air volume. Both operating modes can be switched on and off for
different segments by means of the extra function of the controller.
· Safety package for debinding in air. Debinding technical ceramics is a critical
process because of the hydrocarbons that are released. Hydrocarbons are
flammable and there is a risk that a flammable mixture could form inside the
furnace. Nabertherm offers tailored safety packages with respect to the process
and the volume of binder that allow the furnace to be operated safely.
· Special heating elements for zirconia sintering
· Protective gas connection to purge with non-flammable protective or reaction
gases
· Automatic gas supply system with solenoid valve and rotameter, controlled by
the extra function of the controller
· Inner process box to improve the gas tightness and to protect the furnace
chamber against contamination
· Refractory brick floor insulation for a higher floor load (Tmax 1700 °C)
· Lift door
· Automatic door lock incl. door contact switch
· Ethernet interface -
Details
Designed as tabletop models, these compact high-temperature furnaces have a variety of advantages. The first-class workmanship using high-quality
materials, combined with ease of operation, make these furnaces all-rounders in research and the laboratory. These high-temperature furnaces are also
perfectly suited for the sintering of technical ceramics, such as zirconium oxide dental bridges.Standard Equipment
· Tmax 1600 °C, 1750 °C, or 1800 °C
· Recommended working temperature 1750 °C (for models LHT ../18), increased
wear and tear must be expected in case of working at higher temperatures
· High-quality molybdenum disilicide heating elements
· Adjustable air inlet opening, exhaust air opening in the roof
· Type B thermocouple
· Controller P470 (50 programs with each 40 segments), controls description see
page 75Additional Equipment
· Over-temperature limiter with adjustable cutout temperature as temperature
limiter to protect the oven and load
· Protective gas connection to purge with non-flammable protective or reaction
gases, not gas tight
· Manual or automatic gas supply system -
Details
These powerful laboratory muffle furnaces are available for temperatures up to 1400 °C, 1500 °C, 1550 °C or 1600 °C. The durability of the SiC rods in
periodic use, in combination with their high heating speed, make these high-temperature furnaces to all-rounders in the laboratory. Heating times of
20 – 25 minutes to 1400 °C can be achieved, depending on the furnace model and the conditions of use.Standard Equipment
· Tmax 1400 °C, 1500 °C, 1550 °C or 1600 °C
· Working temperature 1500 °C (for high-temperature furnaces LHTC ../16),
increased wear and tear must be expected in case of working at higher
temperatures
· Optional flap door (LHTC) which can be used as work platform or lift door
(LHTCT) with hot surface facing away from the operator (High-temperature
furnace LHTCT 01/16 only with lift door)
· Switching system with solid-state-relays, power tuned to the SiC rods
· Easy replacement of heating rods
· Adjustable air inlet opening, exhaust air opening in the roof
· Controller C450 (10 programs with each 20 segments), alternative controllers
see page 75Additional Equipment
· Over-temperature limiter with adjustable cutout temperature as temperature
limiter to protect the oven and load
· Protective gas connection to purge with non-flammable protective or reaction
gases, not gas tight
· Manual or automatic gas supply system -
Details
These big chamber furnaces LH 15/12 – LF 120/14 have been trusted for many years as professional chamber furnaces for the laboratory. These furnaces
are available with either a robust insulation of light refractory bricks (LH models) or with a combination insulation of refractory bricks in the corners and low
heat storage, quickly cooling fiber material (LF models). With a wide variety of optional equipment, these chamber furnaces can be optimally adapted to
your processes.Standard Equipment
· Tmax 1200 °C, 1300 °C, or 1400 °C
· High furnace chamber with five-sided heating for very good temperature
uniformity
· Heating elements on support tubes ensure free heat radiation and a long service
life
· Controller mounted on furnace door and removable for comfortable operation
· Protection of bottom heating and flat stacking surface provided by embedded
SiC plate in the floor
· LH models: multi-layered insulation of light refractory bricks and special backup
insulation
· LF models: high-quality fiber insulation with corner bricks for shorter heating and
cooling times
· Door with brick-on-brick seal, hand fitted
· Gegenerously dimensioned heating provides for short heating times
· Self-supporting arch for high stability and greatest possible protection against
dust
· Motorized exhaust air flaps
· Freely adjustable air inlet integrated in furnace floor
· Base included
· Controller B400 (5 prgrams with each 4 segments), alternative controllers see
page 75Additional Equipment
· Parallel swinging door for opening when hot with hot surface facing away from
the operator
· Lift door with electro-mechanic linear drive
· Separate wall-mounting or floor standing cabinet for switchgear
· Cooling system to cool the furnace with a defined temperature gradient or with
a preset fresh air volume. Both operating modes can be switched on and off for
different segments by means of the extra function of the controller.
· Protective gas connection to purge with non-flammable protective or reaction
gases
· Manual or automatic gas supply system
· Scale to measure weight reduction during annealing -
Details
This weighing furnace with integrated precision scale and software, was designed especially for combustion loss determination in the laboratory. The
determination of combustion loss is necessary, for instance, when analyzing sludges and household garbage, and is also used in a variety of other
processes for the evaluation of results. The difference between the charged total mass and the combustion residue is the combustion loss. During the
process, the software included records both the temperature and the weight loss.Standard Equipment
Like muffle furnaces L(T), except:
· Delivery includes base, ceramic plunger with base plate in the furnace lining,
precision scale and software package
· 4 scales available for different maximum weights and scaling ranges
· Process control and documentation for temperature and combustion loss via
VCD software package for monitoring, documentation and control see page 74
· Controller B410 (5 programs with each 4 segments), alternative controllers see
page 75Additional Equipment
· Chimney, chimney with fan or catalytic converter
· Over-temperature limiter with adjustable cutout temperature as temperature
limiter to protect the oven and load
· Port for thermocouple in the rear wall or in the furnace door
· Please see page 24 for more accessories -
Details
Designed for a Routine High Level of Perfomance
Delivering maximum efficiency, the autoflex smartbeam III is a workhorse , space saving vertical design system that can be customized to readily handle both routine and challenging analytical tasks.
Featuring numerous innovation in laser technology , instrument resolution and precision , and an extended mass range of measurement , the Αutoflex III smartbeam gives you access to a system capable of greatly advancing your research at a value price.
-
DetailsWe offer for sale a Varian 450-GC Gas Chromatograph. This GC was set up for standalone operation comprising of a Packed/Wide Bore On-Column Inlet, TCD Detector, FID Detector both with EFC, and a Vici Single Horizontal Valve with small valve Oven. It is setup to run samples through the TCD and then through the FID. We tested the unit using 2 GC standards and diverting the column to the respective detector. Everything tested accordingly.
In excellent working condition, comes with our usual 3 months guarantee.
Copyright Scientific-Instruments 2012
Powered by Sylviecom